Printer MemoryC-8 v DocuPrint C20/NC20 User GuideClosing the SystemBoard from the FrontComplete the following steps after you have installed theprinter memory1 Reinstall the system board access cover.A While holding the cover at the angle shown, align thetabs on the back of the access cover with the slotslocated at the rear of the access opening.B Push down the top of the access cover until it snapsinto place.2 Reattach the input tray and output bin.If you need help, see the Quick Installation Guide.3 Reconnect all cables on the back of the printer.4 Reconnect the power cord to the printer and a properlygrounded electrical outlet.5 Make sure the Ready message appears on the ControlPanel display. If an error message appears, see Chapter 5in the System Administrator Guide.To verify that the memory card option is installedproperly, see Chapter 3, Printing Menu Settings.
