Loading Paper2-12 v DocuPrint C20/NC20 User GuideUsing Tray 2 The optional Tray 2 can be used for several different typesof paper. See the Supplies/Options Guide for sizes andcapacity.To Load Tray 2:1 Squeeze the tab located on the width guide lever and slidethe width guide lever to the far left side of the tray.If you are loading envelopes, go to Step 4 on page 2-13.2 Flex the sheets back and forth to loosen them, then fanthem. Do not fold or crease the paper. Straighten theedges on a level surface.3 Place the print material against the right side of the inputtray with the recommended print side facing you and thetop edge in first. (Insert letterhead paper with the top ofthe page facing down.) Go to Step 5 on page 2-13.Do not overfill Tray 2 because the print materialmay not feed correctly through the printer or youmay get a paper jam.
