Input Tray 2Appendix C: Printer Options v C-25Input Tray 2Tray 2 is shipped in two pieces, the paper tray and thepaper support. The following sections give completeinstructions for attaching the paper tray and the papersupport.Installing thePaper Tray1 Make sure you have all the items shown. If any items aremissing or damaged, contact your Xerox representative orauthorized Xerox dealer. Slide the system board accesscover to the left until it snaps into place.2 Unplug the printer power cord.3 Remove the rear cover.A Press down on the two tabs located at the top of therear cover and pull the cover away from the printer.B Store the rear cover for future use.4 Locate the slots on both sides on the back of the printer.
