Printer MemoryAppendix C: Printer Options v C-5Accessing the SystemBoard from the FrontTo install or remove memory, you must access the printersystem board which is under the input tray. Follow thesesteps:1 Unplug the printer power cord.2 Disconnect all cables from the back of the printer.3 Remove the input tray and output bin unit.A Grasp underneath the unit, and pull up hard to a 45°angle until it releases from the printer.B Hold the unit at this angle and pull it away from theprinter.4 Remove the system board access cover.A Locate the tab on the access cover and push it towardthe printer.B Grasp the tab and lift the access cover until it touchesthe metal bar.C Pull the access cover straight out from the printer.5 Continue with the section “Installing Printer Memory” onthe next page.
