Installing Printer OptionsAppendix C: Printer Options v C-3Installing Printer OptionsYou can customize your printer by changing memorycapacity and installing different connectivity options.This chapter provides instructions for installing eachoption. To install each option, you must first access theprinter system board. Access is from three locationsdepending upon the option you are installing:• Under the input tray and output bin unit on the frontof the printer• The back of the printer, and• The right side of the printer (when facing the front ofthe printer).Table C.1 lists printer options, where to access them, andwhere to find installation instructions.Table C.1 Installing OptionsOption Location of System Board Access Go to...Printer memory Under the input tray page C-4Flash memory On the back of the printer page C-9Tri-Port interface card On the right side of the printer page C-17Hard Disk On the right side of the printer page C-20You need a small Phillips screwdriver to complete theinstallation of some options.
