Flash MemoryAppendix C: Printer Options v C-9Flash MemoryFlash memory can be used to store downloaded fonts,macros, symbol sets, logos, and forms.You can install one flash memory SIMM in your printer.Flash memory SIMMs are available in 1, 2, and 4MB.Accessing the SystemBoard from the RearTo install a flash memory SIMM, you need to access theprinter system board on the back of the printer. Followthese steps to access the board:Data stored in flash memory is retained when the printer ispowered off.1 Turn the printer so its back is facing you.2 Unplug the printer power cord.3 Disconnect all cables from the back of the printer.4 Do one of the following:• Remove the optional Tray 2, if one is installed. If youneed help, see the documentation that came with it.• Remove the printer rear cover. Press down on the twotabs located at the top of the rear cover, and pull thecover away from the printer.
