7.9 Adjusting the Color Registration 16312. After entering the values, press the Set> button to confirm your entry.The display returns to the screen shown onthe right.13. Enter the values for the slow scan.Press the < > button to display [SlowScan].14. Press the < > or button toaccept the selection.A screen that allows you to enter theadjustment values for the slow scan isdisplayed.15. Enter the values using the < > and < >buttons. Use the < > button to move thecurser.(Example: M=+2)16. After entering the values, press the Set> button to confirm your entry.The display returns to the screen shown onthe right.17. When you are finished with the settings,press the print screen.After changing the adjustment values, reprint the Color Registration Chart using theprocedure in "Printing the Color Registration Chart" (P. 160).If the value is not “0” for each color, perform the color registration again.Enter AdjustmentFast ScanEnter AdjustmentSlow ScanSlow ScanY= 0 M= 0 C= 0Slow ScanY= 0 M=+2 C= 0Enter AdjustmentSlow Scan
