5.2 Description of Menu Items 93Job Time-out Sets the amount of time the printer waits for a print job. If a time-out occurs during datareception, the printer stops the reception and prints the data that has been received.• [5 Seconds] to [300 Seconds] (default: [30 Seconds])Specify the time-out value in 1 second increments. The printer waits for additionaldata before it cancels the job.• [Off]Disables the job time-out.Auto Job History Sets whether to automatically print a report on the completed print jobs ([JobHistory Report]).• [Off] (default)Does not automatically print the [Job History Report].• [On]Automatically prints the [Job History Report] when the number of print jobs processedreaches 20.Note• You cannot set this during printing.• You can print the [Job History Report] from the [Report / List] menu.• You need to restart the printer to activate the new settings. After making the settings,switch the printer off and then on again.Print ID Prints a user ID on the specified location.• [Off] (default)Does not print a user ID.• [Top Left]Prints a user ID on the top left corner of paper.• [Top Right]Prints a user ID on the top right corner of paper.• [Bottom Left]Prints a user ID on the bottom left corner of paper.• [Bottom Right]Prints a user ID on the bottom left corner of paper.Print Text Sets whether the printer outputs PDL data, which is not supported by the printer, as textwhen the printer receives it. Text data is printed on A4 or Letter size paper.• [Off] (default)Does not print the received data.• [On]Prints the received data as text data.RAM Disk Allocates memory to the RAM Disk file system for the Secure Print/Sample Printfeature.• [On]Allocates memory for using the Secure Print/Sample Print feature.• [Off] (default)Does not allocate memory for using the Secure Print/Sample Print feature.Note• [RAM Disk] appears only when additional memory (optional) is installed.Substitute Tray Sets whether to print on paper loaded in another tray when there is no paper left in thetray selected by the auto tray selection feature.• [Off] (default)Select this not to replace paper but display a message prompting you to load paper.• [Larger Size]Select this to replace the paper with a larger size paper before printing in 100%magnification ratio.• [Closest Size]Select this to replace the paper with the nearest size paper before printing in 100%magnification ratio.Note• These settings will be overridden by requests sent from computers.Item Description
