164 7 Maintenance7.10 Adjusting the Image Transfer VoltageWhen you get bad printing results such as having white spots on the printed image, spillingtoner out on the printout, or a bluish printout, adjust the image transfer voltage to solve theseprinting problems.The image transfer voltage can be adjusted for each paper type within the range of -6 to 6in increments of 1. The default is “0”.Use the following procedure to adjust the image transfer voltage.1. Press the panel to display the menu screen.2. Press the < > button until [Admin Menu] isdisplayed.3. Press the < > or button toaccept the selection.[Wired Network] is displayed.4. Press the < > button until [MaintenanceMode] is displayed.5. Press the < > or button toaccept the selection.[Adjust PaperType] is displayed.6. Press the < > button until [Adjust BTR] isdisplayed.7. Press the < > or button toaccept the selection.[Plain Paper] is displayed.8. Press the < > button until the paper typeyou want to set is displayed.(Example: Recycled Paper)9. Press the < > or button toaccept the selection.A screen that allows you to enter the valueis displayed.10. Press the < > or < > button to set thevalue, then press the button.(Example: 1)11. Press the print screen.MenuReport / ListMenuAdmin MenuAdmin MenuWired NetworkAdmin MenuMaintenance ModeMaintenance ModeAdjust PaperTypeMaintenance ModeAdjust BTRAdjust BTRPlain PaperAdjust FuserRecycled PaperRecycled Paper0 *Recycled Paper1 *
