5.2 Description of Menu Items 97PCLSpecifies the settings for the PCL.Item DescriptionOutput Size Sets the size of the paper to be used when printing.• [A4] (default), [A5], [B5], [8.5 x 11"], [8.5 x 13"], [8.5 x 14"], [7.25 x 10.5"], [Env 3.9 x7.5"], [Env 110 x 220mm], [Env 162 x 229mm], [Env 4.1 x 9.5"], [Custom Size]Orientation Sets the print orientation to [Portrait] or [Landscape].• [Portrait] (default)• [Landscape]Font Sets the font to be used when printing. (default: [Courier])Symbol Set Sets the font for symbols. (default: [ROMAN-8])Font Size Sets the font size. You can specify the value in increments of 0.25 pt.• [4.00] to [50.00] (default: [12.00])Font Pitch Sets the font pitch (number of characters per inch).You can specify the value inincrements of 0.01 cpi.• [6.00] to [24.00] (default: [10.00])Form Lines Sets the form line (the number of lines per form). You can specify the value inincrements of 1.• [5] to [128] (default: [64])Quantity Sets the number of copies to be printed. You can specify the value in increments of 1.• [1] to [999] (default: [1])Image Enhance Sets whether to perform image enhancement.Image enhancement is a feature that makes the boundary line between black and whitesmoother to decrease jags and enhance the visual appearance.• [On] (default)• [Off]HexDump Sets whether to print the data sent from a computer in ASCII codes corresponding tothe hexadecimal notation format in order to check the data contents.• [Disable] (default)• [Enable]Draft Mode Sets whether to print in draft mode. This mode increases print speed but decreasesprint quality.• [Disable] (default)• [Enable]Line Termination Sets the line termination control codes. Set how you want the printer to interpret CR, LFand FF control codes.• [Off] (default)The line termination command is not added.CR=CR, LF=LF, FF=FF• [Add-LF]The LF command is added.CR=CR+LF, LF=LF, FF=FF• [Add-CR]The CR command is added.CR=CR, LF=CR+LF, FF=CR+FF• [CR-XX]The CR and LF commands are added.CR=CR+LF, LF=CR+LF, FF=CR+FFOutput Color Sets the color mode. This settings is used when the color printing mode setting is notspecified for the print job that is sent to the printer.• [Black] (default)Prints in the black and white mode.• [Color]Prints in the color mode.
