5.2 Description of Menu Items 95Adjust Fuser Sets the fuser temperature. You can specify the value between -2 to 2 for each papertype.• [Plain Paper] (default: [0])• [Recycled Paper] (default: [0])• [Bond Paper] (default: [0])• [Heavyweight 1] (default: [0])• [Heavyweight 2] (default: [0])• [Labels] (default: [0])• [Coated 1] (default: [0])• [Coated 2] (default: [0])• [Coated 3] (default: [0])• [Envelope] (default: [0])Auto Adjust Regi Adjust the color registration automatically. Selecting [On] adjusts the color registrationautomatically.• [On] (default)• [Off]Adjust ColorRegi Adjust the color registration manually.• [Auto Adjust]Adjust the color registration.• [Color Regi Chart]Prints the Color Registration Chart.• [Enter Adjustment]Enter the values to adjust the registration.Refer to• "Adjusting the Color Registration" (P. 160)Adjust Altitude Sets the elevation of the location where the printer is being used.• [0] (default), [1000m], [2000m], [3000m]Clean Developer Cleans the developer by rotating it for a certain period of time.When you get bad printing results such as having skewed, uneven halftone images,cleaning the developer may solve this printing problem.Refer to• "Cleaning the Developer" (P. 169)Toner Refresh Refreshes the toner cartridges by forcing to consume toner in the toner cartridges.When the printed image is light, the toner cartridge refreshing may solve this printingproblem.Refer to• "Toner Cartridge Refreshing" (P. 167)Drum Refresh Reduces the light fatigue of the drum cartridge that is caused by exposure to light whileleaving the front cover open.Refer to• "Drum Cartridge Refreshing" (P. 168)Print Meter Initializes the meter counts.Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NVmemory is nonvolatile memory that retains the settings of the printer even when itspower is switched off. After executing this function and restarting the printer, all themenu options are reset to their default values.Note• You cannot execute this menu during printing.• You need to restart the printer to activate this setting. After making the setting, switchthe printer off and then on again.Storage Disk Clears the RAM disk (optional). Executing this menu deletes all of the data in the RAMdisk.Note• [Storage Disk] appears only when additional memory (optional) is installed.Item Description
