1.2 Setting the Network Environment (DocuPrint C1110 only) 236. Press the < > or button toaccept the selection.[IPv4] or [IP mode] is displayed.If [IP mode] is displayed, press the < >button to display [IPv4].7. Press the < > or button toaccept the selection.[Get IP Address] is displayed.8. Press the < > or button toaccept the selection.The current setting is displayed.9. Press the < > button until [Panel] isdisplayed.10. Confirm your selection by pressing the button.The display shows [Reboot to applysettings] for 3 seconds and returns to thesetting screen.You will reboot the printer after setting thegateway address. Go on to the next step.11. Press the < > button to return to [Get IPAddress].12. Press the < > button to display [IPAddress].13. Press the < > or button toaccept the selection.The current IP address is displayed.14. Enter the value in the first field using the< > or < > button, and press the < >button.Note• If you do not need to change the setting, press the< > button to advance to the next field.• Pressing and holding down the < > or < > buttonincrements the value by 10.• To return to the previous field, press the < > button.15. Enter the rest of the fields in the samemanner. After entering the last (4th) field,press the button to confirmyour entry.16. If you want to set a subnet mask andgateway address, press the < > buttonand proceed to Step 17.If you want to finish the setting, proceed toStep 24.TCP/IPIPv4IPv4Get IP AddressGet IP AddressDHCP / Autonet*Get IP AddressPanelGet IP AddressPanel *IPv4Get IP AddressIPv4IP AddressIP Address000.000.000.000*IP Address192.000.000.000IP Address192.168.001.100*
