3/99DocuPrint N24, N32 and N40 Service Manual 8-163 Options8.4 High Capacity Feeder8.4.1 High Capacity Feeder Specifications.GEN 8.4.1.1 General SpecificationsGEN 8.4.1.2 High Capacity Feeder Space RequirementsFor easy operation, maintenance, and replacing of consumables, the following space requirements arethe minimum clearances allowed. Figure 8.4.1.2a illustrates the space requirements when the HighCapacity Feeder Option is installed below the printer.Figure 8.4.1.2aHCF Configuration.1 60.5 inches (1537mm)2 36 inches (914mm)3 4 inches (102mm)4 12 inches (305mm)5 36.5 inches (927mm)6 72 inches (1829mm)Minimum of 30 inches (762mm) above the top of theprinter.Category SpecificationConfigurationCustomer installed option. Attaches under the base printer.The High Capacity Feeder (HCF) has three trays; Tray 3, Tray 4 andTray 5.Paper feedThe HCF Tray 3 is the same as Trays 1 and 2 and supports the samepaper handling capabilities as Tray 2. Trays 4 and 5 each hold 1000sheets of Letter, A4 or Executive Paper. Trays 4 and 5 use long edgefeed only.Power requirements The Printer provides all of the HCF power requirements; +5VDC and+24VDCSize and weightHeight: 16.8in. (426mm)Width: 20.5in. (520mm)Depth: 19.3in. (490mm)Weight: 89.5lbs. (40.7kg)
