CentreWare Internet ServicesWorkCentre 7425/7428/7435System Administrator Guide3111. To select a banner sheet tray:a. On the Other Settings screen, in the Items column, touch Banner Sheet Tray, then touchChange Settings.b. Select the tray that will hold the banner sheet paper.c. Tray 3 is the suggested choice, with Tray 4 as the secondary tray.12. Touch Save.Set the Ethernet Speed1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter toopen CentreWare Internet Services.2. Click the Properties tab.3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.4. Click the Connectivity folder, then the Physical Connections folder.5. Click Ethernet.6. Select your network speed from the drop down list.7. Click Apply, then click Reboot Machine.Configure TCP/IP Settings1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter toopen CentreWare Internet Services.2. Click the Properties tab.3. Click the Connectivity folder, then the Protocols folder.4. Click TCP/IP.5. Review the available selections as displayed on your screen and explained in the TCP/IPConfiguration Selection List, below.6. Accept the default Host Name, or type in your own unique Host Name for this printer.7. Select the desired method for obtaining an IP Address.8. If Static is selected, type in the addresses that apply for IP Address, Subnet Mask, and Gateway.Caution: Changing the IP address for the printer will affect NetBIOS/IP, LPR/LPD, FTP, SNMP, and Port9100 printing. It will also interrupt the ability to communicate with the printer using theCentreWare Internet Services. When you change the printer's IP Address, make sure to print out aConfiguration Report so that you have a record of the TCP/IP addresses for use with computers thatneed to communicate with the printer using TCP/IP.Note: If DHCP or BOOTP addressing method is selected, you cannot manually change the IP Address,Subnet Mask, or Gateway. Select Manual if you wish to manually enter these addresses.Note: When using DHCP, set a reasonably long Lease Time for the IP Address so that the printer can berestarted, when taken out of service for maintenance, without being assigned a new IP Address.Note: Upon rebooting, when the system comes up, if it can’t locate a DHCP server on the network it willuse whatever IP address it was previously configured with.
