AS400 PrintingWorkCentre 7425/7428/7435System Administrator Guide59AS400 PrintingAS400 Raw TCP/IP Printing to Port 9100 (CRTDEVPRT)This is the procedure to set up printing to a printer from an AS/400 using the SNMP drivers. Thisprocedure is intended for users familiar with the AS/400 system, especially those experienced withprinting in an AS/400 environment. The AS/400 must run V4R5 of OS/400 so that the SNMP drivers arepresent (or V4R3/V4R4 with the most current PTFs installed). The printer must have port 9100 enabled.To enable port 91001. Open your Web browser and enter the IP address of the printer in the address field. Press Enter toopen CentreWare Internet Services.2. Click the Properties tab.3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.4. Click the Connectivity folder.5. Click the Protocols folder.6. Select Port 9100 in the directory tree.7. Ensure the Enabled box is checked to enable Raw TCP/IP Printing.8. Leave the TCP Port Number set to 9100 for Port 1.9. Leave the Bidirectional and Maximum Connections settings at their default values.10. Set the End of Job Timeout to the number of seconds to wait before processing a job without anEnd Of Job indicator.11. Leave the PDL Switching Enabled box at its default value.12. Click Apply to accept the changes, Undo to return the settings to their previous values, or DefaultAll to enter printer defaults for all settings (recommended).Note: The settings are not applied until you restart the printer.13. Click the Status Tab.14. Click the Reboot Machine button and click OK to reboot the printer. The network controller takesapproximately 5 minutes to reboot and network connectivity will be unavailable during this time.
