IPP ConfigurationWorkCentre 7425/7428/7435System Administrator Guide55IPP – Added Port NumberNote: If you just enabled the IPP port, the machine may have to reboot before you can view or changethe Port Number.1. On the IPP Selection menu, press the selection line labeled IPP – Added Port Number.2. Press the Change Settings button.3. Use the displayed keypad to add a Port Number, such as 80 (the displayed default for HTTP).4. To save the setting, press Save.5. To exit the screen, without making any changes, press Cancel.Exiting the IPP Selection MenuTo exit the IPP selection menu, which returns you to the Port Settings menu, press the Close button inthe upper right corner of the touch screen.Exiting the Port Settings Menu and Returning to the Tools Tab1. To exit the Port Settings menu, returning to the Tools screen, press the Close button in the upperright corner of the Port Settings menu screen.2. Wait several seconds and the Auto Clear service should log you out.Note: If you changed any settings in the Port Settings menu, the printer will automatically reboot toregister and enable your new settings.Configuring IPP Settings with CentreWare Internet Services1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter toopen CentreWare Internet Services.2. Click the Properties tab.3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.4. Click the Connectivity folder, then the Protocols folder.5. Click IPP.6. The available selections include:• Port Number: The default value is 631. This is the port number assigned by IANA (InternetAssigned Numbers Authority.• Add Port Number• TBCP Filter: Displayed when PostScript is enabled.• Administrator Mode: This is disabled by default.• DNS Enablement• Connection Timeout7. Verify that DNS is checked (Enabled) by default. If enabled, the DNS Server will resolve HostNames to IP Addresses, in support of printing with IPP.
