Linux ScanningXerox WorkCentre 3025User Guide115Linux ScanningYou can scan a document using the Unified Driver Configurator window. Make sure that the machine ispowered on and connected to your computer via USB cable, or connected to the network. Install thescan driver. Follow the install instructions provided with your driver.Scanning1. Double-click the Unified Driver Configurator on your desktop.2. Click the button to switch to Scanners Configuration.3. Select the scanner in the list.• If you use only one machine device and it is connected to the computer and turned on, yourscanner appears in the list and is automatically selected.• If you have two or more scanners connected to your computer, you can select any scanner towork at any time. For example, while acquisition is in progress on the first scanner, you mayselect the second scanner, set the device options, and start the image acquisitionsimultaneously.4. Click Properties.5. Load originals face up into the automatic document feeder, or place a single original face down onthe platen glass.6. From the Scanner Properties window, click Preview.The document is scanned and the image preview appears in the Preview Pane.7. Drag the pointer to set the image area to be scanned in the Preview Pane.8. Change the scan options in the Image Quality and Scan Area sections.• Image Quality: This option allows you to select the color composition and the scanresolution for the image.• Scan Area: This option allows you to select the page size. The Advanced button enables youto set the page size manually.If you want to use one of the preset scan option settings, select the option from the Job Typedrop-down list.9. Click Default to restore the default setting for the scan options.10. When you have finished, click Scan to start scanning.The status bar appears on the bottom left of the window to show you the progress of the scan. Tocancel scanning, click Cancel.The scanned image appears.11. When you are finished, click Save on the toolbar.12. Select the file directory where you want to save the image and enter the file name.13. Click Save.
