CentreWare® Internet ServicesXerox® WorkCentre® 3025User Guide35Configuring Wi-Fi DirectTM using CentreWare Internet ServicesWi-Fi DirectTM allows you to enable your wireless devices, such as notebooks, mobile phones and PCs toestablish wireless connectivity without the need for a wireless router, access point, or Wi-Fi hot spots.1. At your workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.4. If prompted, enter the admin for the ID and 1111 for the Password, and select Login. SelectProperties.5. In the Network Settings link, select the Wi-Fi link. Then select the Wi-Fi Direct TM link below that.6. Select On for Wi-Fi DirectTM.7. Enter the following:• Device Name• IP Address• Activate or Deactivate the Group Owner• Network Key8. Select Apply and then OK.Setting the Ethernet Speed Using CentreWare Internet Services1. At your workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.5. Select Properties.6. In the Network Settings link select the General link.7. Select one of the following speeds from the Ethernet Speed drop-down menu:• Automatic• 10 Mbps (Half Duplex)• 10 Mbps (Full Duplex)• 100 Mbps (Half Duplex)• 100 Mbps (Full Duplex)8. Select on Apply to save the changes.The change to Ethernet Speed rate will take effect after System Reboot screen displays.9. Select OK.10. When the Acknowledgement screen displays, select OK.11. Reboot the machine.
