Fax RegulationsXerox® WorkCentre® 3025User Guide231Fax RegulationsUnited StatesFax Send Header RequirementsThe Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer orother electronic device, including a fax machine, to send any message unless such message clearlycontains in a margin at the top or bottom of each transmitted page or on the first page of thetransmission, the date and time it is sent and an identification of the business or other entity, or otherindividual sending the message and the telephone number of the sending machine or such business,other entity or individual. The telephone number provided may not be a 900 number or any othernumber for which charges exceed local or long distance transmission charges.Data Coupler InformationThis device complies with Part 68 of the FCC rules and the requirements adopted by the AdministrativeCouncil for Terminal Attachments (ACTA). On the cover of this device is a label that contains, amongother information, a device identifier in the format US:AAAEQ##TXXXX. If requested, this numbermust be provided to the Telephone Company.A plug and jack used to connect this device to the premises wiring and telephone network must complywith the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephonecord and modular plug is provided with this device. It is designed to be connected to a compatiblemodular jack that is also compliant. See installation instructions for details.You may safely connect the machine to the following standard modular jack: USOC RJ-11C using thecompliant telephone line cord (with modular plugs) provided with the installation kit. See installationinstructions for details.The Ringer Equivalence Number (REN) is used to determine the number of devices that can beconnected to a telephone line. Excessive RENs on a telephone line could result in the devices notringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceedfive (5.0). To be certain of the number of devices that can be connected to a line, as determined by theRENs, contact the local Telephone Company. For products approved after July 23, 2001, the REN is partof the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are theREN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN isseparately shown on the label.To order the correct service from the local telephone company, you may also have to quote the codeslisted below:• Facility Interface Code (FIC) = 02LS2• Service Order Code (SOC) = 9.0Y
