CentreWare® Internet ServicesXerox® WorkCentre® 3025User Guide33Change the Administrator PasswordIt is recommended that you change the default administrator password to a more secure password, sothis Xerox machine is not compromised.To change the Administrator password:1. At your workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select the Properties icon.4. If prompted, enter the admin for the ID and 1111 for the Password, and select Login. SelectProperties.5. In the Security link on the left hand side, select System Security.6. Select the System Administrator link.7. In the Access Control area:a. Ensure the Web UI Access Control Enable check box is selected.b. In the Login ID field, enter a new login name.c. Select the Change password check box to change the password. In the Password field, entera new numeric password.d. Enter the password again in the Confirm Password field.CAUTION: Do not forget the password or you could be completely locked out of the system,requiring a service call.8. Select Apply to save the changes.9. Select OK when the acknowledgement message displays.10. Select the Advanced button. The Advanced Access Control screen appears.11. Select Protect Login IPv4 Address to enable this feature if required, and enter an IPv4 Address inthe box.12. Select the required option for the Login Failure Policy, for users who fail to login several times. Theoptions are: Off, 3 times, or 5 times.13. Select the required option for Auto Logout. The options are 5, 10, 15, or 30 minutes.14. Select Security Settings Reset if required.15. Select Save to save your changes.Configuring Wireless Connectivity Using CentreWare Internet Services(WorkCentre 3025NI)Note The machine will not connect to the wireless network while the network cable is attached.1. At your workstation, open the web browser and enter the IP Address of the machine in theAddress Bar.2. Press Enter.3. Select Properties.
