Fax Procedure: Sending a FaxXerox® WorkCentre® 3025User Guide125From Your Computer:From CentreWare Internet Services: At your workstation, open the web browser and enter the IPAddress of the machine in the Address Bar. Press Enter. From the CentreWare Internet Servicespage for your machine, select Properties, then General, then Fax. Make the changes needed toeach feature. Click Apply when you are done.From Easy Printer Manager: Open Easy Printer Manager in your Start menu. Select the printer forwhich you are changing features. When the printer page opens, click on Machine Settings tab.You will be redirected to CentreWare Internet Services. Follow the steps below to complete thisprocess.Enter the Fax Number1. The UI on the control panel should sayFax 1: _____2. Enter the recipient’s fax number by:a. Keypad Dial: Enter the number using the keypad when the machine prompt Fax 1:____displays.b. Manual Dial: Press the On Hook button to hear a dial tone before entering the fax number.c. Redial: Press the Redial button on the right side of the control panel to automatically dial thelast fax number (or numbers) used. Scroll through the list to select the number.d. Speed Dial: For a one-digit (0-9) speed dial number, press and hold the corresponding digitbutton on the keypad. For a two or three-digit speed dial number, press the first digitbutton(s) and then hold down the last digit button.e. Address Book: Select the Address Book button to access the address book and select aSpeed Dial or Group Dial entry to add to the recipient list. Refer to Address Book section forinstructions on setting up and using the Address Book.Start the Job1. At the machine, press the Start button. (For initiating a fax job from your PC, see Fax from PC.)2. The machine scans the originals, dials the entered number(s), and attempts to connect with theremote fax machine. Once connected, the machine sends the fax job.
