Powering On the MachineXerox® WorkCentre® 3025User Guide13Powering Off the MachineThere are two ways to power the machine off:• Press the Power button.• Press the Power Save button, and use the Up/Down arrow buttons to select Power Down andthen OK.Using the Keypad (WorkCentre 3025NI Only)As you perform various tasks, you may need to enter names and numbers. For example, when you setup your machine, you enter your name or your company’s name, and the fax number. When you storefax numbers in memory, you may also enter the corresponding names.1. When you are prompted to enter a letter, locate the button labeled with the character you want.Press the button until the correct letter appears on the display.• For example, to enter the letter O, press 6, labeled with MNO.• Each time you press 6, the display shows a different letter, M, N, O, m, n, o and finally 6.2. You can enter special characters, such as @ / . & + -. Refer to Keypad Characters.3. To enter additional letters, repeat step 1. If the next letter isprinted on the same button wait 2 seconds between presses, ormove the cursor by pressing the down arrow and then press thebutton again. The cursor will move to the right and the nextletter will appear on the display.If you make a mistake while entering a number or name, pressthe up arrow to delete the last digit or character. Then enterthe correct number or character.4. When you have finished entering all characters, press OK.
