Copying122 Xerox ® WorkCentre® 3655/3655i Multifunction PrinterUser GuidePrinting a Sample CopyThe Sample Copy features allows you to print a test copy of a complex print job to inspect before youprint multiple copies of the job. Once you inspect the job, you can print the or cancel the remainingcopies. Sample copies do not count as part of the quantity selected. For example, if you select threecopies, one sample copy prints, and the three other copies are held until you release them to print. Theresult is a total of four copies.To print a sample copy of your copy job:1. Press the Services Home button, then touch Copy.2. Touch the desired copy settings.3. Touch the Job Assembly tab, then touch Sample Job > On.4. Touch OK.5. On the control panel, press the green Start button. The sample copy prints.6. Print the remaining copies or delete the job.− To release and print the remaining copies of the job, touch Print.− If the sample copy is unsatisfactory, touch Delete.Saving Copy SettingsTo use a particular combination of copy settings for future copy jobs, you can save the settings with aname and retrieve them for later use.To save the current copy settings:1. Press the Services Home button, then touch Copy.2. Touch the Job Assembly tab, then touch Save Current Settings.3. Using the touch screen keyboard, type a name for the saved settings.4. Touch OK.Retrieving Saved Copy SettingsYou can retrieve and use any previously saved copy settings for current jobs.Note: To save the copy settings with a name, see Saving Copy Settings on page 122.To retrieve saved settings:1. Press the Services Home button, then touch Copy.2. Touch the Job Assembly tab, then touch Retrieve Saved Settings.3. Touch the desired saved setting.Note: To delete a saved setting, touch the setting, then touch Delete Settings.4. Touch Load Settings. The saved settings are loaded for the current copy job.
