Printing88 Xerox ® WorkCentre® 3655/3655i Multifunction PrinterUser GuideReleasing a Secure Print1. At the control panel, press the Job Status button.2. Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see Secure Print onpage 87.3. Use the keypad to enter the passcode that you assigned to the print job, then touch OK.4. Touch the corresponding print job in the list, then touch Print.Deleting a Secure Print1. At the control panel, press the Job Status button.2. Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see Secure Print onpage 87.3. Use the keypad to enter the passcode that you assigned to the print job, then touch OK.4. Touch the corresponding print job in the list, then touch Delete.Sample SetThe Sample Set job type allows you to print a sample copy of a multiple-copy job and hold theremaining copies at the printer. After you review the sample copy, you can select the job name from theprinter control panel to print the additional copies.Sending a Sample Set Print Job1. On the Printing Options tab, from the Job Type list, select Sample Set.2. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.3. Select an option for 2-sided printing.4. Select a print-quality mode.5. Select another tab or click OK.6. To send the job to the printer, in the Print window, select the number of copies to print, then clickOK or Print.A sample copy prints immediately. The sample copy is not counted as part of the print job.7. After reviewing the copy, use the printer control panel to print or delete the remaining copies.Note: You can use Sample Set as a part of the Earth Smart settings. In Earth Smart settings, setSample Set as your default Job Type.8. To print the job, select it from the job list on the printer control panel.9. Press OK.