Scanning136 Xerox ® WorkCentre® 3655/3655i Multifunction PrinterUser GuideSelecting Layout AdjustmentsLayout adjustments provide additional settings for the size and orientation of the original, and erasingthe edges.To select layout adjustments:1. Press the Services Home button, then touch Workflow Scanning.2. Touch the Layout Adjustment tab.3. To specify the amount to erase from the edges of your image:a. Touch Edge Erase.b. On the Edge Erase screen, select an option:• All Edges: Erases all four edges by the same amount. Touch the All Edges arrows tospecify the amount to erase from the edges.• Individual Edges: This option specifies different amounts to erase from the edges. Tospecify the amount to erase from each edge, use the arrows.c. Touch OK.4. To scan the correct area of the original image:a. Touch Original Size.b. On the Original Size screen, select an option:• Auto Detect: This option allows the printer to determine the size of the original.• Preset Scan Area: This option specifies the area to scan when it matches a standard papersize. In the scrolling list, touch the desired paper size.• Custom Scan Area: You can specify the height and width of the area to scan. To specifythe area, touch the Height-Y and Width-X arrows.c. Touch OK.5. To manage how the scanner treats blank pages:a. Touch Blank Page Management.b. Select an option:• Include Blank Pages: This option includes scanned pages that are blank.• Remove Blank Pages: This option omits scanned pages that are blank.c. Touch OK.
