Installation and SetupXerox ® WorkCentre® 3655/3655i Multifunction Printer 45User GuideInstalling Print Drivers for Macintosh OS X Version 10.7 and LaterInstall the Xerox print driver to access all features of your printer.To install the print driver software:1. Insert the Software and Documentation disc into the appropriate drive on your computer.2. To view the .dmg file for your printer, double-click the disc icon on your desktop.3. Open the .dmg file, then navigate to the appropriate installer file for your operating system.4. Open the installer file.5. To acknowledge the warning and introductory messages, click Continue. Click Continue again.6. To accept the license agreement, click Continue, then click Agree.7. To accept the current installation location, click Install, or select another location for the installationfiles, then click Install.8. Enter your password, then click OK.9. Select your printer in the list of discovered printers, then click Continue.10. If your printer does not appear in the list of discovered printers:a. Click the Network Printer Icon.b. Type the IP address of your printer, then click Continue.c. Select your printer in the list of discovered printers, then click Continue.11. To accept the print queue message, click OK.12. To accept the installation success message, click Close.Note: The printer is automatically added to the printer queue in Macintosh OS X version 10.4 andlater.To verify that the print driver recognizes the installed options:1. From the Apple menu, click System Preferences > Print and Scan.2. Select the printer in the list, then click Options and Supplies.3. Click Options.4. Confirm that all of the options installed on the printer appear correct.5. If you change settings, click OK, close the window, then exit System Preferences.
