Regulatory Information248 Xerox ® WorkCentre® 3655/3655i Multifunction PrinterUser GuideEnvironmental Benefits of Duplex PrintingMost Xerox products have duplex printing, also known as 2-sided printing, capability. This enables you toprint on both sides of the paper automatically, and therefore helps to reduce the use of valuableresources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires thaton models greater than or equal to 40 ppm color or greater than or equal to 45 ppm monochrome theduplex function has been auto enabled, during the setup and driver installation. Some Xerox modelsbelow these speed bands may also be enabled with 2-sided printing settings defaulted on at the time ofinstall. Continuing to use the duplex function will reduce the environmental impact of your work.However, should you require simplex/1-sided printing, you may change the print settings in the printdriver.Paper TypesThis product can be used to print on both recycled and virgin paper, approved to an environmentalstewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper(60 g/m²), which contains less raw material and thus save resources per print, may be used in certainapplications. We encourage you to check if this is suitable for your printing needs.ENERGY STARThe ENERGY STAR program is a voluntary scheme to promote the development and purchase of energyefficient models, which help to reduce environmental impact. Details on the ENERGY STAR program andmodels qualified to ENERGY STAR can be found at the following website:www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQPower Consumption and Activation TimeThe amount of electricity a product consumes depends on the way the device is used. This product isdesigned and configured to enable you to reduce your electricity costs. After the last print, the deviceswitches to Ready mode. In this mode, the device can print again immediately. If the product is not usedfor a period of time, the device switches to a Power Saver mode. In these modes, to enable reducedproduct power consumption, only essential functions remain active.The product takes slightly longer to produce the first print after it exits Power Saver mode than it takes inReady mode. This delay is the result of the system waking up from Power Saver mode and is typical ofmost imaging products on the market.You can set a longer activation time or completely deactivate the Power Saver mode. This device cantake longer to switch to a lower energy level.To learn more about Xerox participation in sustainability initiatives, go to:www.xerox.com/about-xerox/environment/enus.html.
