Network InstallationXerox WorkCentre 5735/5740/5745/5755/5765/5775/5790System Administrator Guide103LDAPNote: LDAP support is only available on the device. Configuration of the LDAP directory settingsrequires the network to support LDAP services.LDAP (Lightweight Directory Access Protocol) is a popular protocol used by large accounts to accesslarge quantities of data including corporate address books. The local system will need to know wherethe LDAP server is located on the network and may need a login name and password if the LDAP serveris not configured to allow NULL names and passwords.The Internet Services LDAP page allows you to configure Lightweight Directory Access Protocolinformation.LDAP is used for the following activities:• To access the corporate address book to locate e-mail addresses for use with the E-mail andInternet Fax services.• To authenticate users when configured as the method of Authentication.• To authorize users to gain access to device features, when configured as the method ofAuthorization.Information ChecklistBefore starting the procedure, ensure the following items are available or tasks have been performed:• Ensure the E-mail feature is functional on the device and your network supports LDAP services.• Obtain the IP Address (or Host Name) of your LDAP Server. The device may also need a loginname and password if the LDAP server is not configured to allow NULL names and passwords.• Use an LDAP client to validate your settings before inputting them into the Internet Servicesmenus. LDAP clients include Microsoft Outlook Express, Microsoft Outlook and NetscapeCommunicator.• To use host names, DNS must be configured on the device.To Configure LDAP ServerAt your Workstation:Note: To configure this feature or these settings access the Properties tab as a SystemAdministrator. For details, refer to Access Internet Services as System Administrator on page 16.1. From the Properties tab, click the [Connectivity] link.2. Click on the [Protocols] link.3. Select [LDAP] in the directory tree, the LDAP page displays.4. To add a new LDAP directory, click on the [Add New] button.5. In Server Information area:a. Select either the [IPv4 Address], [IPv6 Address] or [Host Name] radio button.b. Enter details in the [Friendly Name] field.c. Enter the IP Address and Port or the Host Name and Port of the Primary and Backup LDAPServer.
