Network InstallationXerox WorkCentre 5735/5740/5745/5755/5765/5775/5790System Administrator Guide67Windows using Microsoft (R) NetworkingNetBIOS over IPInformation ChecklistBefore starting the procedure, ensure the following items are available or tasks have been performed:• An existing operational network utilizing the TCP/IP protocol.• A Static IP Address for the machine.• A Subnet Mask Address for the machine.• A Gateway Address for the machine.• A Host Name for the machine.• Ensure device is connected to the network with an Ethernet Cable.• The CentreWare Print and Fax Drivers CD (delivered with your machine).At the MachineNote: To configure this feature or these settings access the Tools pathway as a SystemAdministrator. For details, refer to Access Tools Pathway as a System Administrator on page 10.1. From the Tools pathway, touch [Network Settings].2. Touch [Network Setup].3. Touch [TCP/IP].4. Touch [TCP/IP Settings].5. In the TCP/IP Settings screen:a. Touch the [Automatic Addressing] button.b. Touch [Disabled].c. Touch [Save].6. Touch [IP Address/Host Name], in the IP Address/Host Name screen:a. For IPv4 Address, touch each octet and enter the IP address using the numerical keypad.b. For Host Name, touch detail bar.c. Enter Host Name using the on-screen keyboard. To access more characters, touch [123] onthe user interface.d. Touch [Save], then touch [Save] to return to the TCP/IP Settings screen.7. Touch [Subnet and Gateway], in the Subnet and Gateway screen:a. For IP Gateway, touch each octet under the title and enter IP Gateway address using thenumerical keypad.b. Repeat this process for the Subnet Mask. When you are finished, touch [Save] to accept thechanges and return to the TCP/IP Settings screen.c. Touch [Close] to return to the TCP/IP screen.
