Embedded FaxXerox WorkCentre 5735/5740/5745/5755/5765/5775/5790System Administrator Guide2644. Touch the [Book Faxing] icon.a. The Book Faxing screen displays. Select one of the following options:• Off• Both Pages - this option will fax both right and left pages.• Left Page Only - this option will fax the left side of the document.• Right Page Only - this option will fax the right side of the document.Note: These positions are based upon the orientation of the pages as you read the bounddocument.b. If you select either Both Pages, Left Page Only or Right Page Only, for Binding Edge Eraseyou can select a required edge erase value from 0.0 to 2.0” using the left and right scrollbutton.c. Touch [Save] to return to the Layout Adjustment tab.Fax Options1. From the Fax Service - Setting screen, select the Fax Options tab.2. Touch the [Confirmation Report] icon.a. The Confirmation Report screen displays. Select [On] to enable a confirmation report toprint every time fax has been sent.b. Touch [Save] to return to the Fax Options tab.3. Touch the [Starting Rate] icon.a. The Starting Rate screen displays. Select one of the following starting speed for thetransmission of the embedded fax job:• Super G3 (33.6 Kbps)• G3 (14.4 Kbps)• Forced (4800 bps)b. Touch [Save] to return to the Fax Options tab.4. Touch the [Delay Send] icon.a. The Delay Send screen displays. Select one of the following:• Off• Specific Time - allows you to select the time you wish the job to be sent.b. If you select Specific Time, select the time you want the job to be sent using the up anddown scroll buttons for Hour and Minute. Select either AM or PM.c. Touch [Save] to return to the Fax Options tab.5. Touch the [Send Header Text] icon.a. The Send Header Text screen displays, select [On] to allow the header text set by the SystemAdministrator.b. Touch [Save] to return to the Fax Options tab.6. Touch the [Mailboxes] icon.a. The Mailboxes screen displays. Select one of the following options:• Off
