Device Connection and Quick SetupXerox WorkCentre 5735/5740/5745/5755/5765/5775/5790System Administrator Guide94. Touch [Confirm] to confirm the selection.The device will begin a controlled power down sequence. It remains on for approximately 45seconds before switching off.Energy Saver OptionsThe device is designed to be energy efficient and automatically reduces its power consumption afterperiods of inactivity. The System Administrator can set up Energy Saver options. For details, refer toEnergy Saver on page 37.At the Device:1. Press the button on the control panel. The Power Down Options screen displays.2. Touch [Energy Saver]. The device will immediately enter Low Power Mode.3. To re-activate the device when in this mode, touch a button on the control panel or touch screen.Quick RestartAt the Device:1. Press the button on the control panel. The Power Down Options screen displays.2. Touch [Quick Restart].3. The Power Down Confirmation screen displays.Note: Any jobs in progress will be lost.4. Touch [Confirm] to confirm the selection. The device will restart.Installation WizardIf this is the first time the device has been powered on, the Installation Wizard will run. If this screendoes not appear, proceed to Configure Network Connectivity Protocols with Internet Services onpage 17.The install wizard will prompt you with questions to help with the configuring of your device.1. When the device is powered on the Language Selection screen displays, select preferredlanguage and touch [OK] to begin.2. The Welcome screen displays, this will guide you through the short series of steps required tosetup your device. Touch [Next].3. The Activation Code screen displays, using the on-screen keyboard enter the Activation Codesupplied with the device. Touch [Next].4. The Customer Support Telephone Numbers screen displays, verify that the Customer SupportTelephone Number and Supplies Telephone Number are correct. If either number are incorrector missing, touch the appropriate type-in region and enter the correct number using the keypad.Touch [Next].5. The Date Settings screen displays, select one of the following for Date Format:• MM/DD/YY (default)• DD/MM/YY• YY/MM/DD
