7 Operations After Replacing PartsFS100 7.1 Home Position Calibration7-77.1.2.3 Changing the Absolute DataTo change the absolute data of the axis when home position calibration iscompleted, perform the following:1. Select {ROBOT} under the main menu.2. Select {HOME POSITION}.3. Select the desired control group.– Perform steps 3 and 4 which have been described in "Registering AllAxes at One Time" to select the desired control group4. Select the absolute data to be registered.– The number can now be entered.5. Enter the absolute data using the numeric keys.6. Press [ENTER].– Absolute data are modified.
