8 System DiagnosisFS100 8.3 Input/Output Status8-148.3.8 Modification of the Signal NameThe name of the universal input or output signal can be modified.The name can be modified in the following two ways.• Direct modification on the UNIVERSAL/SPECIFIED INPUT/OUTPUTwindow.• Modification from the menu8.3.8.1 Direct Modification on the Universal/Specified Input/Output Window1. Move the cursor to the signal name to be modified in the UNIVERSAL/SPECIFIED INPUT/OUTPUT window, and press [SELECT].– The window for character input appears.2. Enter the signal name.3. Press [ENTER].– New signal name is registered.Signal name
