1 Outline1.3.2 SERVOPACK Part Names1-41.3.2 SERVOPACK Part NamesThis section describes the part names of SERVOPACKs.Use a SERVOPACK together with a converter. For details, refer to 1.7 Combinations for Multi-Winding DriveSystems.Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the frontcover attached when using the SERVOPACK.Rotary switch (S1001) Used to set the MECHATROLINK-II stationaddress.4.1.1 Setting theMECHATROLINK-II Com-munications Switches(S1001 and S1002)DIP switch (S1002) Used to make settings for MECHATROLINK-IIcommunications.4.1.1 Setting theMECHATROLINK-II Com-munications Switches(S1001 and S1002)MS1 LED indicator This indicator cannot be used. –MMA, MM2, MM3, and MM4LED indicatorsLights yellow during MECHATROLINK-II com-munications. –Panel operator keys Used to set parameters. 2.1 OverviewGround terminal Used to protect against electrical shock.Be sure to ground this terminal. 3.1 Main Circuit Wiring(cont’d)No. Name Description ReferenceNo. Name Description Reference DIP switch (S3) Do not use this switch. –With plastic cover open M-II
