YASKAWA Sigma-V Series User Manual

Contents

YASKAWA Sigma-V Series User Manual Manual pdf 61 page image

3.2 Connecting the Converter to the SERVOPACK3-153 Wiring and Connection3.2 Connecting the Converter to the SERVOPACK3.2.1 Connecting the ConnectorsConnect CN901 and CN103 on the SERVOPACK and converter as shown in the following figure.3.2.2 Interconnecting TerminalsUse the busbars that are provided with the converter to connect the P and N terminals between the SERVO-PACK and the converter.The bus bars can be connected in any direction.CN901: I/O signal connector between the SERVOPACK and converterCN103: Control power supply input connectorI/O signal connection cable24-VDC control power supply cableSERVOPACKConverter M-IICable Name Cable Model Cable Length DescriptionIO signal connection cable JZSP-CVI02-A4-E 0.4 m This cable connects the CN901 connectors onthe SERVOPACK and converter.24-VDC control powersupply cable JZSP-CVG00-A4-E 0.4 m This cable connects the CN103(CN104) con-nectors on the SERVOPACK and converter.M-II