Yaesu FT DX 1200 Operation Manual

Also see for FT DX 1200: Operating manual Operating manual Operating manual

Page 107FT DX 1200 O PERATING M ANUALThe 0enu system of the FTDX 1200 provides extensive customi]ation capability, so you can set up your transceiver justthe way you want to operate it. The 0enu items are grouped by general utili]ation category, and are numbered from “001AGC” to “196 ED PSK”.Using the Menu1. 3ress the [MENU] button to engage the 0enu mode.The display will show the 0enu 1umber, the 0enuGroup 1ame and the 0enu Item.. 5otate the [VFO-B/CLAR] knob or press the STbutton) to select the 0enu item you wish to modify.3. 3ress the [SELECT] button, then rotate the [VFO-B/CLAR] knob or press the ST button) to changethe current setting of the selected 0enu item.A DVICE :3ress the [CLEAR] button located on the upperright of the [VFO-B/CLAR] knob) momentarily toreset the selected 0enu item to the factory defaultvalue.4. When you have ¿nished making your adjustments,press the [SELECT] button, then press the [MENU]button to save the new setting and exit to normal op-eration. If you only momentarily press the [MENU]button, the new settings will not be retained.MENU MODE RESETYou may reset all the 0enu settings to their origi-nal factory defaults, if desired.1. Turn the front panel [POWER] switch off.. 3ress and hold in the [MENU] button, andwhile holding it in, press the [POWER]switch to turn the transceiver back on. 1owrelease the [MENU] button.[VFO-B/CLAR] Knob[MENU] Button[SELECT] Button [CLEAR] ButtonM ENU M ODE219Ჹ᲼Ჽ/'07Ჸ ᲸᲸᲸ ᲸOUGEOUGEᲸᲸ ᲸOUGE(/+&#55.196 &'.#;&'.#;&'.#;#)%ᲸᲸ#)%ᲸᲸ#)%ᲸᲸᲹNo. Menu FunctionGroup Value