Yaesu FT DX 1200 Operation Manual

Also see for FT DX 1200: Operating manual Operating manual Operating manual

Page 20 F T DX 1200 O PERATING M ANUAL[SCOPE] Switch3ress this button momentarily to switch between the0enu, the Scope, the Full TFT screen Scope, theScope $F-FFT when the optional FFT unit is in-stalled), and the Scope 0emory when there is mem-ory) screens. When the optional FFT unit is installed,press and hold this button for more than one secondto operate the decode function when operating CW,5TTY, 3S.).[AUTO] SwitchThis button is used to select the scope mode $UT2or 0$1U$L)[MENU] SwitchThis button is used to access the 0enu system. Thevarious transceiver characteristics may be config-ured. 0enu operation is described in detail, in thismanual.IMPORTANT NOTE:3ressing the [MENU] button will activate the 0enu,and the 0enu items will appear on the display. 2nceyou have changed the parameters, you must press the[MENU] button to save any con¿guration changes.FRONT PANEL CONTROLS & SWITCHES[SELECT] SwitchThis button is used to select the 0enu system.[WSTX] SwitchThese buttons permit selection of the 0enu itemsand settings.