Yaesu FT DX 1200 Operation Manual

Also see for FT DX 1200: Operating manual Operating manual Operating manual

Page 96 FT DX 1200 O PERATING M ANUALMoving Memory Data to the VFO-A registerYou may transfer the contents of the currently selected memory channel into the VF2-$ register, if you like.1. 3ress the [V/M] button, as necessary, to go to the“0emory” mode.. 3ress the [MCH/GRP] button.3. 5otate the [VFO-B/CLAR] knob to select thememory channel the contents of which you wish totransfer to VF2-$.4. 3ress and hold in the [MXA] button for one second,until you hear the double beep. The data in the se-lected memory channel will now be transferred toVF2-$.A DVICE :This transfer of data to VF2-$ does not affect the origi-nal contents of the memory channel this is a “copy”function that leaves the memory contents unchanged.[V/M] Button[MCH/GRP] Button[VFO-B/CLAR] Knob[MXA] ButtonM EMORY O PERATIONSTANDARD MEMORY OPERATION[AXM] Button[VFO-B/CLAR] Knob[LOCK] Button[V/M] ButtonErasing Memory Channel Data1. 3ress the [V/M] button, if necessary, to enter theVF2 mode.. 3ress the [AXM] button. The data stored in the cur-rently selected memory channel will be displayed inthe display.3. 5otate the [VFO-B/CLAR] knob to select the mem-ory channel that you would like to erase.4. 3ress the [LOCK] button to erase the contents of theselected memory channel.A DVICE : The FTDX 1200 can not erase the memory channels“01” and “5M-01” through “5M-10” U.S. version). If you make a mistake and wish to restore the memo-ry’s contents, just repeat steps 1) through 4) above.