Page 94 FT DX 1200 O PERATING M ANUALS TANDARD MEMORY OPERATIONThe Standard 0emory of the FTDX 1200 allows storage and recall of up to memories, each storing freTuency, mode,and a wide variety of status information, detailed previously. 0emories may be grouped into as many as six 0emoryGroups, and additionally you get nine pairs of band-limit 30S) memories along with ¿ve Q0B Quick 0emory Bank)memories.Memory Storage1. Set VF2-$ up with the freTuency, mode, and status,the way you want to have it stored.. 3ress the [AXM] button momentarily the currentchannel number will start blinking in the display andthe “MCK” notation will appear.3. 5otate the [VFO-B/CLAR] knob to select the mem-ory channel that you wish to store the data on.4. 3ress and hold in the [AXM] button for one secondto store the freTuency and other data into the selectedmemory channel. $ double beep will confirm thatyou have held the [AXM] button in long enough.Memory Channel Recall1. 3ress the [V/M] button, if necessary, to enter the“0emory mode”.. 3ress the [MCH/GRP] button. $ memory channelnumber and the “MCH” notation will appear in thedisplay.3. $fter pressing the [MCH/GRP] button, you mayrotate the [VFO-B/CLAR] knob to select the desiredmemory channel.A DVICE :To work within a particular 0emory Group, press andhold the [MCH/GRP] button for one second the “GRP”notation will appear on the display), then rotate the[VFO-B/CLAR] knob to select the desired 0emoryGroup. 1ow press the [MCH/GRP] button the “MCH”notation will appear instead of the “GRP”) you maynow choose the memory channel within the selected0emory Group.[V/M] Button[MCH/GRP] Button[VFO-B/CLAR] Knob[AXM] Button[VFO-B/CLAR] KnobM EMORY O PERATION