Yaesu FTM-7250DR Advance Manual

Also see for FTM-7250DR: Operating manual Technical supplement Advance manual

Yaesu FTM-7250DR Advance Manual Manual pdf 10 page image

9Advanced OperationSplit Tone OperationThe FTM-7250DR can be configured to operate in a “Split Tone” system via the Setupmenu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control.1. Press and hold the [MHz(SETUP)] key to enter theSet mode.2. Rotate the DIAL knob to select “SQL EXP 43”.3. Press the [MHz(SETUP)] key, then rotate theDIAL knob to select “ON”.Default: OFF4. Press the [MHz(SETUP)] key momentarily, thenrotate the DIAL knob to select “SQL TYPE 44”.5. Press the [MHz(SETUP)] key, and then rotate theDIAL knob to select the following parameters.D CODE: DCS Encode only (the “DCS” icon willblink during operation)T DCS: Encodes a CTCSS Tone and Decodesa DCS code (the “T” icon will blink andthe “DCS” icon will appear during oper-ation)D TONE: Encodes a DCS code and Decodes aCTCSS Tone (the “T SQ” icon will ap-pear and “DCS” icons will blink duringoperation)6. Press and hold the [MHz(SETUP)] key to save the new setting and exit to normaloperation.