Yaesu FTM-7250DR Advance Manual
Also see for FTM-7250DR: Operating manualTechnical supplementAdvance manual
                                          | |
Contents
| 
40Menu Selection Details52 VFO MODEFunction: Set the frequency setting range in the VFO mode by DIAL knob.Available Values: ALL / BANDDefault: BANDALL: Tuning continues to the next band when reaching the end of a band.BAND: Tuning continues to the other end of the current band when reaching the end ofthe band. When changing the band, press the [BAND(SQL)] key.53* WX ALERT (USA version only)Function: Set the weather Alert Feature, used for notifying storms and hurricanes, ONor OFF.Available Values: ON / OFFDefault: OFF54* WX VOL (USA version only)Function: Selects the audio output level of the Weather Alert.Available Values: NOR VOL / MAX VOLDefault: NOR VOL55* (53) W/N DEVFunction: Reduction of the Microphone Gain/Deviation and receiver bandwidth.Available Values: WIDE / NARROWDefault: WIDE56* (54) W-DGIDFunction: Sets the WIRES-X DG-ID number.Available Values: AUTO/DGID01-99Default: AUTOAUTO: Only open nodes, set to the DG-ID number “00” may be connected.DGID01 - 99: Only nodes matching the set DG-ID number may be connected.57* (55) MY CALLFunction: Sets your station call sign.Here’s how to input the call sign:1. Press the [MHz(SETUP)] key momentarily.The currently registered call sign ID is shown.2. Rotate the DIAL knob to select the first letter/number of the call sign, then press the[V/M(MW)] key momentarily to save the first letter/number and move on to the nextcharacter.3. Repeat the previous step as necessary to complete the call sign (up to 10 characters).4. To make a correction, press the [BAND(SQL)] key to backspace the cursor; now re-en-ter the correct letter/number.5. When the desired call sign is entered, press and hold the [MHz(SETUP)] key to savethe settings and exit to normal operation. |
Related manuals for Yaesu FTM-7250DR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine