Yaesu FTM-7250DR Advance Manual

Also see for FTM-7250DR: Operating manual Technical supplement Advance manual

Yaesu FTM-7250DR Advance Manual Manual pdf 21 page image

20ScanningMemory Skip ScanningWhen some memory channels are continuously active, you may wish to skip them duringscanning, but still have them available for manual selection.To mask a memory to be skipped (only) during scanning, use the following procedure:1. Set the radio to the Memory Recall mode by press-ing the [V/M(MW)] key repeatedly, as necessary,until “MR” and a channel number appear on theright side of the display.2. Rotate the DIAL knob to select the Memory Chan-nel to be skipped during scanning.3. Press and hold the [MHz(SETUP)] key, then rotatethe DIAL knob to select “SCAN SKP 40”.4. Press the [MHz(SETUP)] key, then rotate theDIAL knob to select “SKIP”. The current MemoryChannel will now be ignored during scanning.5. Press and hold the [MHz(SETUP)] key to save the new setting and exit to normal op-eration.A blinking “u” icon will appear when you recall the“skipped” memory channel manually.To reinstate a channel into the scanning loop, select“OFF” in step 4 above, after first recalling the currentlyblocked channel (the “Skipped” channel is accessiblevia manual channel selection methods using theDIAL knob in the Memory mode, whether or not it islocked out of the scanning loop).