Yaesu FTM-7250DR Advance Manual
Also see for FTM-7250DR: Operating manualTechnical supplementAdvance manual
                                          | |
Contents
| 
19ScanningScan Resume OptionsSelect one of the three receiving operations to be performed after the scanning stops.(1) Restart scanning after receiving the frequency for the set amount of time. Select from2.0 to 10.0 seconds (0.5 step).(2) Continue receiving the frequency until the signal disappears, and then restart scan-ning 2 seconds after the signal disappears (BUSY).(3) Stop scanning and receive that frequency (HOLD).1. Press and hold the [MHz(SETUP)] key to enter theSet mode.2. Rotate the DIAL knob to select “SCAN RSM 39”.3. Press the [MHz(SETUP)] key, then rotate the DIALknob to select the desired scan-resume mode.Default: 5.0 SEC4. Press and hold the [MHz(SETUP)] key to save thenew setting and exit to normal operation. |
Related manuals for Yaesu FTM-7250DR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine