Yaesu FTM-7250DR Advance Manual
Also see for FTM-7250DR: Operating manualTechnical supplementAdvance manual
                                          | |
Contents
| 
29Setup (Menu) ModeThe FTM-7250DR Setup (Menu) mode, already described in parts of many previouschapters, is easy to activate and setup. The Menus may be used to configure manyof transceiver parameters, some of which have not been detailed previously. Use thefollowing procedure to activate the Setup (Menu) mode:1. Press and hold the [MHz(SETUP)] key to enter theSetup menu.2. Rotate the DIAL knob to select the Menu Item tobe adjusted.3. Press the [MHz(SETUP)] key momentarily to en-able adjustment of the selected Menu item, andthen rotate the DIAL knob to perform the actualadjustment.4. After completing the selection and adjustment,press and hold the [MHz(SETUP)] key to exit theSetup menu and resume normal operation.Menu Item Function Available Values Default1 APO Enables/Disables the Automatic PowerOff feature.0.5H to 12H (0.5H step)/OFF OFF2 BCLO Enables/Disables the Busy ChannelLock-Out feature. ON/OFF OFF3 BEP KEY Enables/Disables the key beeper. KEY+SCAN/KEY/OFF KEY+SCAN4 BEP EDGE Enables/Disable the Band-edge beeperwhile scanning. ON/OFF OFF5 BEP LVL Sets the beep level HIGH/LOW HIGH6 BEP STBY Enables/Disable the Standby beep ON/OFF ON7 BELL Selects the CTCSS/DCS/EPCS BellRinger repetitions. 1 to 20/CONTINUE/OFF OFF8 CLK TYPE Shifting of the CPU clock frequency. A/B A9 DC VOLT Indicates the DC Supply Voltage. --- ---10 DCS CODE Setting of the DCS code. 104 standard DCS codes 02311 DCS INVSelect a combination of DCS inversioncodes in terms of communication direc-tion.NORMAL/INVERT/BOTH NORMAL12 DIG AMS Sets the transmission mode TXMANUAL/TX FMFIX/TX DIGTL/AUTO AUTO13 DIG VW Turn the VW mode selection ON or OFF. ON/OFF OFF14 DI POPUP Sets the information pop-up time 2 / 4 / 6 / 8 / 1 0 / 2 0 / 3 0 / 6 0 /CONTINUE/OFF 10 SEC15 DPID LST DP-ID list (Display/Register/Clear) (Registered DP-ID) ---16 DT AUTO Enables/Disables the DTMF Autodialerfeature. MANUAL/AUTO MANUAL17 DT DELAY Setting of the DTMF Autodialer TX DelayTime. 50/250/450/750/1000 450 MS |
Related manuals for Yaesu FTM-7250DR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine