Yaesu FTM-7250DR Advance Manual

Also see for FTM-7250DR: Operating manual Technical supplement Advance manual

Yaesu FTM-7250DR Advance Manual Manual pdf 19 page image

18Memory OperationNaming a Memory ChannelYou may wish to append an alphanumeric “Tag” (label) to each memory, to aid inrecollection of the channel’s use (such as club name, etc.).1. Recall the memory channel on which you wish to append a label.2. Press and hold the [MHz(SETUP)] key to enter theSet mode.3. Rotate the DIAL knob to select “MEM NAME 26”.4. Press the [MHz(SETUP)] key momentarily to en-able programming of the nametag.5. Use the numeric keypad or DIAL knob to input thecharacters.Press the [V/M(MW)] key to move to the nextcharacter.• Inputting charactersExample quickly Pressing the [2] key, eachtime switches the following characters:a → b → c → A → B → C → a →Example Rotating the DIAL switches the fol-lowing characters.•••  A - Z  (symbol)  a - z  (symbol)  0 - 9  (symbol)  •••• Moving the cursor, deleting the input character[V/M(MW)] key: Moves the cursor to the right[BAND (SQL)] key: Moves the cursor to the rightPressing and holding the [GM (AMS)] key: Erases all characters after the cursor6. Repeat step 5 to program the remaining letters, numbers, or symbols of the desiredlabel. A total of 8 characters may be used in the creation of a label.7. When you have programmed a label that is under 8 characters, press the [MHz(SET-UP)] key to confirm the label.8. When you have completed the creation of the label, then press and hold the [V/M(MW)]key to save the label and exit.While operating in the Memory Recall mode, pressthe [MHz(SETUP)] key to toggle the display betweenindication of the frequency, and indication of theAlpha/Numeric label.