Yaesu FTM-7250DR Advance Manual

Also see for FTM-7250DR: Operating manual Technical supplement Advance manual

Yaesu FTM-7250DR Advance Manual Manual pdf 22 page image

21ScanningPreferential Memory ScanThe FTM-7250DR also allows setting up a “Preferential Scan List” of channels, which youcan “flag” within the memory system. The flagged channels are designated by an “u” iconwhen they are selected, one by one, for the Preferential Scan List.When memory scanning is initiated beginning on a channel with the “u” icon appended, onlythose channels bearing the “u” icon will be scanned. If scanning is initiated on a channelwhich does not have the “u” icon appended, all channels including those with the “u” iconappended will be scanned.Here is the procedure for setting up and using the Preferential Scan List:1. Set the radio to the Memory Recall mode by press-ing the [V/M(MW)] key repeatedly, as necessary,until “MR” and a channel number appear on theright side of the display.2. Rotate the DIAL knob to select the Memory Chan-nel that you wish to add to the preferential ScanList.3. Press and hold the [MHz(SETUP)] key, then rotatethe DIAL knob to select “SCAN SKP 40”.4. Press the [MHz(SETUP)] key, and then rotate theDIAL knob to select “SELECT”.5. Press and hold the [MHz(SETUP)] key to save thenew setting and exit to normal operation.To initiate Preferential Memory Scanning:1. Set the radio to the Memory Recall mode by pressing the [V/M(MW)] key repeatedly, ifnecessary.2. Rotate the DIAL knob to select any memory chan-nel which has an “u” icon appended to the chan-nel number.3. Press and hold in either the microphone [UP] or [DWN] button to initiate PreferentialMemory Scanning. Only the channels which have a “u” icon appended to the channelnumber will be scanned.