Components29LOCKWhen the lock button on the remote controltransmitter is pressed briefly, the beepersounds once. This indicates the lock mode isselected and the engine cannot be started.The lock mode is selected only when themain switch is in the “ ” (off) position. Theengine cranks but cannot be started while theYamaha Security System is in the lock mode.UNLOCKWhen the unlock button on the remote con-trol transmitter is pressed briefly, the beepersounds twice. This indicates the unlock modeis selected and the engine can be started.EMU26182Remote control boxThe remote control lever actuates both theshifter and the throttle. The electrical switch-es are mounted on the remote control box.EMU26191Remote control leverMoving the lever forward from the neutral po-sition engages forward gear. Pulling the leverback from neutral engages reverse. The en-gine will continue to run at idle until the leveris moved about 35° (a detent can be felt).Moving the lever farther opens the throttle,and the engine will begin to accelerate.1. Lock button2. Unlock buttonYamahaSecuritySystemmodeNumberof beepsMainswitchEnginecan bestartedLock 1 beep “ ” NOUnlock 2 beeps “ ”/“ ” YES1 2ZMU064561. Power trim and tilt switch2. Remote control lever3. Neutral interlock trigger4. Neutral throttle lever5. Main switch6. Engine shut-off switch7. Throttle friction adjuster1. Remote control lever2. Power trim and tilt switch3. Free accelerator4. Throttle friction adjuster23214ZMU04569©2019 Yamaha Motor Corporation, U.S.A.