5-39Starter motorTIP:Make sure that the clutch assembly “1” doesnot come out from the pinion shaft “2”.7. Install the pinion shaft assembly “1”, thelever “2”, a new rubber seal “3”, the plan-etary gears “4”, the outer gear “5”, andthe plate “6”.8. Align the protrusion “a” on the stator “1”with the slot “b” in the cover assembly“2”, and then assemble the starter motor.9. Install the spring “1”, pinion “2”, pinionstopper “3”, and clip “4”.10. Install a new gasket “1”, the spring “2”,and the magnet switch “3”.Installing the starter motor1. Install the starter motor to the power unit.See “Installing the starter motor” (7-21).33c 122b abc1aC1 2214 3561ab21212343223213
