9-61PTT gear pump8. Install the spacers “1” and “2”, the portplugs “3”, and new O-rings “4” and “5”.Installing the gear pump assemblyLubricate the parts using ATF Dexron II dur-ing assembly.When assembling the PTT unit, do not usea rag. Otherwise, dust and particles couldget on the PTT unit components, causingpoor performance.1. Install the gear pump assembly “1”, pro-tection valves “2” and “3”, wave washer“4”, backup ring “5”, filter “6”, and plate“7”, and then tighten the gear pump bolt“8” to the specified torque.Plug “2”: 4 N·m (0.4 kgf·m,, 3.0 ft·lb)12445213Gear pump bolt “8”:7 N·m (0.7 kgf·m, 5.2 ft·lb)788654231
