Yamaha F150A Service Manual

Also see for F150A: Rigging guide Service manual Owner's manual Owner's manual Owner's manual

7-9Power unit assembly012345678910A16. Install the lifting harnesses to the enginehangers “1”.17. Suspend the power unit.18. Remove the power unit mounting bolts“2”, “3”, and “4”, and then remove thepower unit.Installing the power unit1. Clean the power unit mating surface, andthen install the dowels “1” and a new gas-ket “2”.2. Install the power unit, and then tightenthe power unit mounting bolts “3”, “4”,and “5” to the specified torque.3. Install the apron “1”, and then tighten theapron screw “2” to the specified torque.4. Connect the flushing hose “1”, and thenfasten it using the plastic tie “2”.11 122233 3334 44Power unit mounting bolt (M8) “3”:20 N·m (2.0 kgf·m, 14.8 ft·lb)Power unit mounting bolts (M10) “4” and“5”: 42 N·m (4.2 kgf·m, 31.0 ft·lb)Apron screw “2”:4 N·m (0.4 kgf·m, 3.0 ft·lb)33344 4445215512